Love your Foger Switch Pro, but don’t want to keep replacing it? I got you, especially since it is not cheap to buy a new one! You can try to refill it and keep the good times (and clouds) rolling in your way. It’s hard and complex, but not that hard. Only need a bit of patience, and you will save money and use it again.
Here’s a simple, no-nonsense guide to help you refill Foger Switch Pro. Grab your tools, follow along to make it happen!
Note: This process is not officially recommended by manufacturers of disposable devices. Proceed at your own risk, and always prioritize your safety when working with e-liquids and vape equipment.
What You’ll Need
First things first, gather a few basic items:
- A small screwdriver or similar tool
- Tweezers or small pliers
- Your favorite e-liquid (close to the original flavor will be better.)
- Paper towels (because spills happen)
- A clean, bright workspace
Got everything? Alright, let’s get started!
Note: Follow the following steps to carefully refill your Refill Foger Switch Pro cartridge without damaging the device.
Step 1: Taking It Apart
1. Separate the Pod From the Battery
The FOGER SWITCH Pro is a modular design with a disposable pod and magnetic battery pack. To begin, gently separate the pod from the battery by pulling them apart. This separable design makes the refill work easier.
2. Take Apart the E-liquid Tank and Built-in 200mAh Battery Part
Use your two hands, one holds the e-liquid tank side, one holds the built-in battery part. Then pull hard to take them apart. A slight twist helps open it up faster.
3. Locate the Tabs on the Pod
On the pod (the part that contains the e-liquid), you’ll find two small tabs on either side. These tabs hold the e-liquid tank in place and need to be released to gain access to the e-liquid chamber.
4. Remove the e-liquid- anti-leak protection stuff
Using a pointed tool like a small screwdriver, carefully press into the tab points to loosen the anti-leak protection stuff, and take it apart from the bottom of the tank. Be gentle to avoid cracking the plastic. Wiggle the stuff side to side as you work, ensuring you don’t damage the pod or the coil inside. After removing it, you’ll see the internal parts.
5. Remove the Rubber piece
Use tweezers or pliers to gently pull out the small rubber plugs sealing the liquid chamber. These seals prevent leaks, so don’t lose them!
Step 2: Adding the E-Liquid
Now you’ve got access to the magical spot where all the flavor happens. It’s time to refill it!
1. Clean Everything Up
Please note that before refilling it, please check the chamber for any leftover liquid or residue. Dab it clean with a paper towel if needed.
2. Refill the Cartridge
Take your vape juice and add it carefully into the e-liquid chamber. Do not overfill. Disposable pods usually hold a limited amount, so fill slowly and stop once the chamber reaches about 80% capacity. This prevents leaks and ensures proper operation. If your e-liquid bottle has a fine tip, this part will be a breeze.
3. Check for Mess
Spill something? No problem. Wipe everything down to keep the device nice and tidy.
4. Seal It Back Up
Once the chamber is filled, pop the rubber plugs back into place. Please make sure all stuffs sit snugly to prevent leaks. And that’s it! You’re ready to close things up.
Step 3: Putting It Back Together
1. Reassemble the Coil
Start to reinsert the coil. In this step, please double-check the orientation to make sure everything lines up the way it did before. Then, snap the protection stuff back onto the pod and make sure all tabs click securely into place.
2. Snap the Shell On
Slide the outer shell back into place. Align the edges carefully and press them down until they click.
3. Test It Out
Shake the vape gently to see if anything feels loose. Then, before using it, please soak the coil for about 5 minutes to avoid dry hits or burning. After that, take a few test puffs to ensure everything is functioning properly.
A Few Quick Tips
- Be Patient
If something feels stuck or tricky, don’t force it. Take a step back and reassess. - Dispose Properly
When your vape is no longer usable, recycle or dispose of it responsibly.
You can try the video to learn more about refilling the device!
Why Refill a Disposable Vape?
Refilling your Foger Switch Pro is a cool way to save money and cut down on waste. You can keep enjoying the great flavors you love without rushing out to buy a new device every time it runs out.
This process might seem a bit fiddly at first; generally, the take-apart work is a little difficult. But after the take-apart job, the refill Foger Switch Pro vape job is just like refilling the normal pod cartridge.
Once you’ve done it, it’ll feel like second nature. Just take your time and enjoy the extra mileage you’re getting out of your vape.
Got questions or more tips? Drop them in the comments below!
